Praat AudioTools

Spectral / Sound design / Native Praat

Spectral Gesture Forge

Turn up to five acoustic recordings into one new 3–7 second stereo gesture. Independent spectral envelopes, phase-aware fusion, moving stereo spectra and optional source-level reverberation shape its attack, body and resonant release.

No Python1–5 source foldersFive gesture charactersFour motion pathsOptional source & global reverb
Five acoustic sources forming a single spectral gestureFive distinct spectral traces converge into one layered curved gesture, then expand into stereo.SOURCE SPECTRAONE GESTURE
Conceptual illustration: acoustic materials become a single evolving spectral event.

One sound, not five layers

Spectral Gesture Forge is a native-Praat spectral resynthesis instrument for creating a single short, expressive sound-design gesture. It draws one recording from each active source folder, extracts acoustic material and combines the recordings inside one evolving spectral synthesis process.

The central idea: the recordings should become one perceptually unified sound, rather than a multitrack mix. Source-specific reverberation can become part of that fused spectral material, rather than an effect applied only after the sound is made.
1. Choose1–5 source folders; one usable file from each
2. PrepareAnalyse attacks and spectral characteristics; optional source reverbs
3. FuseShared, time-varying spectra in six overlapping bands
4. Shape & moveIndependent ADSR envelopes and stereo trajectories
5. FinishOptional global reverb; one stereo Sound in Praat

Listen to examples

These three existing examples illustrate three different gesture characters using the same random seed. They are musical demonstrations, not a controlled comparison between the new reverberation modes.

Impact

Rapid spectral onset, concentrated body and decisive release.

SGF_Impact_seed1

Bloom

Early low-frequency body followed by a wider, resonant spectral expansion.

SGF_Bloom_seed1

Reverse

An accelerating accumulation toward a late peak with a sharp release.

SGF_Reverse_seed1

The timbres also depend on the chosen recordings, envelope settings and spectral-fusion strength.

Getting started in Praat

  1. Run Spectral Gesture Forge from AudioTools → Spectral.
  2. Choose Folders to browse (1–5). Leave Folder paths empty to select folders through Praat, or supply their full paths separated by semicolons (;).
  3. Choose Random or Spectral complementarity for source selection.
  4. Set the Duration (3–7 seconds), select a Gesture character, and adjust envelope sharpness, spectral variation, fusion strength and stereo movement.
  5. Under Reverberation, leave None for the original dry fusion, or select Per-source, Global or Per-source + global. Set amount, average decay and tail mode. Enable More reverb settings only if you want to adjust diversity, pre-delay or damping in a second dialog.
  6. Leave Keep result in Praat enabled and click OK. The script renders offline; it can play the result and draw a diagnostic figure.
  7. To save the sound, select the new SGF_… Sound in Praat’s Objects window and use Save → Save as WAV file…. There is no automatic export option in the current interface.
Folder rule: source selection scans supported audio files directly inside each chosen folder. It does not recursively search subfolders. Unreadable or unsuitable candidates are skipped.

Controls at a glance

ControlWhat it doesDefault
Folders to browse (1–5)Number of source folders to select when the paths field is blank.1
Folder pathsOptional semicolon-separated folder paths; bypasses folder-selection dialogs.Blank
Source selectionRandom selection or spectral-complementarity search across candidates.Random
Duration (s)Length of the principal gesture, limited to 3–7 seconds. An extended reverberation tail can make the rendered Sound longer.4.5
Gesture characterImpact, Bloom, Reverse, Pulse or Hybrid.Impact
Envelope sharpness (%)Controls ADSR attack/decay timing and curvature.75
Spectral variation (%)Controls differences among source-band envelopes.60
Spectral fusion strength (%)Changes the power-mean magnitude-combination rule.85
Motion presetSweep, Converge, Expand or Oscillate.Expand
Stereo width (%)Degree of separation between spectral regions across the stereo image.70
Motion amount (%)Strength of stereo trajectory and relative motion.65
Reverb modeNone, Per-source, Global, or Per-source + global.None
Reverb amount (%)Strength of the selected reverberation pathway.25
Average reverb decay (s)Nominal decay time, internally bounded to 0.2–5 seconds.1.8
Tail modeContained keeps reverb within the gesture; Extended allows an additional decaying tail.Contained
More reverb settingsOpens a second Praat dialog for decay diversity, pre-delay and damping.Off
Random seedReproduces selection, envelopes and spatial/reverb variations when sources and settings are unchanged.1
Keep result in PraatRetains the generated Sound in the Objects list so you can listen or save it.On
Draw visualizationDraws a diagnostic figure in Praat Picture.On
Play resultAuditions the generated Sound after rendering.On

Additional reverberation settings

Tick More reverb settings to open a second dialog after the main form. The defaults are Reverb decay diversity: 50%, Pre-delay: 30 ms and Reverb damping: 40%. These settings are not shown in the main form unless requested.

Five gesture characters

Impact

A quick attack, especially strong low-frequency body and short high-frequency flashes. Designed for compact, dramatic sonic events.

Bloom

Low and middle frequencies appear early; upper bands emerge later and spread outward, with a longer resonant evolution.

Reverse

Energy accumulates toward a late shared peak. A swift release follows, while a small amount of low resonance may remain.

Pulse

Two or three closely spaced internal impulses are shaped as one unified gesture, rather than a phrase or repeating rhythm.

Hybrid

Different spectral bands use different gesture behaviours, producing less predictable yet coordinated transformations.

Reverberation as part of the sound

The optional reverb engine offers two different musical relationships between sound and acoustic space: reverberation inside spectral fusion and reverberation after fusion. It is disabled by default.

None

Runs the original spectral fusion without reverberation. Use this as the reference for comparing the instrument's dry synthesis.

Per-source

Each selected recording receives its own reverberant response. The wet sound enters the fusion engine as additional spectral material, with separate, evolving reverberant envelopes. This is not simply reverb added to a completed mix.

Global

Applies stereo reverberation to the already-fused gesture, creating a common surrounding acoustic space while retaining its articulated source spectrum and stereo trajectory.

Per-source + global

Combines both methods: source-specific resonances contribute to the fused sound, followed by a lighter global stereo reverb. The global wet amount is reduced to avoid excessive buildup.

Why source-level reverb is different

Every source can have a different decay, pre-delay, damping and diffusion profile. Instead of being mixed after synthesis, its reverberant spectrum becomes an additional member of the shared power-mean fusion. Dedicated reverberant envelopes allow the tail to emerge as the dry source-band envelopes recede. The result can sound like a single, imaginary acoustic object with its own internal resonance.

How the reverberation is generated

Praat generates finite, source-specific impulse responses with early reflections, diffuse decaying energy and frequency-dependent damping, then applies them through FFT convolution. This is a finite convolution reverberator, not a recursive feedback network. Source-dependent and seeded differences give each recording its own reverberant character.

SettingMusical effect
Reverb amountControls the strength of the reverberant contribution.
Average decaySets the approximate centre of the source-dependent decay range.
Decay diversityAt low values source reverbs are similar; higher values create greater differences in decay and related characteristics.
Pre-delaySeparates the attack from the start of the reverberant response.
DampingShortens high-frequency reverberation relative to lower-frequency energy.
Tail modeContained: the tail is faded inside the selected gesture duration. Extended: the sound can continue after the gesture, with up to approximately four additional seconds as the reverberant energy decays.
Gesture versus tail: Extended mode does not stretch the principal 3–7 second gesture. It provides extra time for the reverb to decay; the final Sound may therefore last longer than the requested gesture duration.

What happens inside the sound?

Source selection

One usable file per folder, chosen randomly or through a bounded comparison of spectral centroid, bandwidth, tonality and six-band energy profiles.

Acoustic material

A detected strong attack determines the source region. Short recordings can be read more slowly, within limits, before their contribution fades.

Spectral shaping

Each source contributes to six overlapping, approximately logarithmic spectral regions, controlled by independent source-band envelopes.

Phase-aware spectral fusion

At each analysis frame, the script combines the selected recordings' spectral magnitudes using a weighted power mean, with phase derived from a soft dominance-weighted complex combination. Inverse FFT and overlap-add construct the resulting signal. If per-source reverberation is enabled, each source's wet signal joins this same fusion process as an additional spectral member.

Power-mean exponent: p = 1 − 0.85 × FusionStrength

Lower fusion strength approaches weighted magnitude summation; higher strength emphasises components supported across the active sources. A material gate excludes nearly silent source-band contributions, and the engine compensates band energy to preserve envelope control.

Analysis uses a 1,024-point FFT with Hann windows and 75% overlap, and six smooth spectral regions centred between approximately 80 Hz and 12 kHz. Sources are resampled to a common 44.1 or 48 kHz working rate. Stereo sources are downmixed for analysis, and a new stereo image is synthesized.

Articulation and resonant memory

Up to 30 direct source-band ADSR envelopes control attack, decay, sustain, release, onset delay and curvature. When per-source reverb is enabled, separate reverberant envelopes allow a decaying spectral memory to emerge during the release without simply lengthening every direct ADSR.

Stereo motion

The script computes changing global and band-dependent positions. Low frequencies remain closer to the centre; higher bands can spread and move independently. Left and right receive different spectral weightings and controlled upper-band phase offsets. Optional global reverb is applied after the stereo fusion, using related but distinct stereo responses.

Sweep

Motion across the stereo field.

Converge

Spectral components move toward the centre.

Expand

A focused gesture opens into a wider stereo field.

Oscillate

Curved, time-varying stereo motion.

Output, saving and repeatability

A standard run creates one stereo Sound in Praat's Objects window, normally named SGF_Impact_seed1 or similarly for the selected character and random seed. When enabled, the script also auditions the result, displays a diagnostic Praat Picture, and prints a detailed rendering report to the Info window.

Saving is manual: select the resulting Sound in the Objects window and choose Save → Save as WAV file…. The current interface has no Export WAV and metadata, output-folder, output-name or comparison-set controls. It does not automatically write a WAV or metadata text file.

Keep result in Praat is enabled by default and should remain enabled if you want to save the generated sound after processing. Turning it off removes the Sound after playback. The source recordings themselves are never overwritten.

The Info-window report includes the selected source files and regions, rendering settings, spectral and stereo measurements, and when active, source-specific reverberation details and the final rendered duration. Randomness is seeded for repeatability, provided the source files and settings remain unchanged.

With Tail mode: Extended, the rendered Sound can exceed the specified 3–7 second gesture duration because reverberation continues after the direct event. The additional tail is bounded and faded before the Sound ends.

Practical notes

Do I need Python or a DAW?

No. The spectral fusion, source reverberation and global reverberation all run offline within native Praat.

Which recordings can I use?

The folder scanner accepts WAV, AIFF/AIF/AIFC, FLAC and MP3 file extensions. Actual decoding depends on the installed Praat version and the individual files.

Does the script use every file in each folder?

No. It selects one usable recording per active folder. The complementarity mode considers a bounded set of candidates (up to 12 analysed and 40 attempts per folder), without scanning nested subfolders.

What happens with short recordings?

The script can slow the read position after the detected attack, up to twice the original span. If the material still runs out, its dry envelopes fade. With Per-source reverb, independently generated decays may continue where permitted by the tail mode.

Which reverberation mode should I try first?

Start with Per-source to make reverberant material part of the spectral fusion. Use Global for a common acoustic space around an already-fused gesture, or Per-source + global for both.

Why doesn't the audio stop exactly at the requested duration?

With Extended tail mode and reverb enabled, the reverberation can continue after the principal gesture. Use Contained if you need the sound to end within the specified 3–7 seconds.

Where is the exported WAV file?

The script no longer exports automatically. Leave Keep result in Praat on, select the resulting Sound in the Objects window, and save it manually as a WAV file.

How can I get the same result again?

Use the same input folders, files, random seed and all processing settings. Reverb randomness is controlled separately so changing the reverb mode does not change the already chosen source regions or direct ADSR shapes.

Is the result always perceived as one fused sound?

No. The engine aims for coherent spectral fusion, but perceptual unity depends on the acoustic sources, fusion strength, envelopes and reverberation settings.

Created by Shai Cohen, Department of Music, Bar-Ilan University. Part of Praat AudioTools (MIT License).