CDP Process Explorer

Explore the sound-transformation engines of the Composers Desktop Project directly in Praat.

Praat AudioTools · Shai Cohen · Bar-Ilan University · Version 0.6.0 (2026) · Windows

AudioTools home · Detailed Script Overview

Overview

CDP Process Explorer brings original Composers Desktop Project (CDP) sound-processing programs into Praat through one interface. Choose a process and its parameters; the processed audio is returned as a new Sound object. The original Sound is preserved.

There are 204 processes in 14 categories, with 183 ready-to-use presets for 61 processes. Traditional waveform processing and PVOC-based spectral transformations use bundled CDP engines. Spectral analysis and resynthesis happen automatically when required. No Python or separate CDP installation is needed. The six additional CDP Chain and Composition scripts are described below.

Getting started

  1. Select exactly one Sound in the Praat Objects window.
  2. Run CDP Process Explorer from Praat AudioTools.
  3. Select a category and a process, then adjust the displayed parameters.
  4. Where available, choose a Preset and press Load to fill the parameter fields, or press Apply/OK to load and process a newly selected preset in one action. For other processes, Standards restores default values.
  5. Listen to the new Sound. Each new result is derived from the original selected Sound, not from a previous result.

Channel handling is automatic: when a process cannot accept the source channel layout, the input is mixed to mono without an additional dialog. The source Sound is never changed. Result playback can be switched off in the dialog.

Requirements: Praat 6.4 or newer; the bundled Windows CDP engine files must remain in the AudioTools CDP folder.

CDP Chains & Compositions (6 scripts)

In addition to the 204 individual CDP processing modes, Praat AudioTools includes six standalone compositional scripts using the same CDP engine. The three Chains process a Sound serially: each stage receives the previous stage's result. The three Compositions process the original Sound in independent parallel branches and combine them into one stereo output. These are separate scripts, not six additional entries in the 204-process catalogue.

Select exactly one Sound in Praat Objects and run the chosen script from the CDP category. The six scripts use fixed, editable settings defined near the beginning of their .praat files; they do not expose a new process-selection or preset dialog. The original Sound is preserved, temporary results are removed, and one final Sound is created, selected, and played once. The scripts use the bundled Windows CDP engines and require Praat 6.4 or newer; no separate CDP installation or Python is required.

Level staging: each chain stage, each composition branch, and each final composition mix is peak-scaled to 0.9. In compositions, stereo branches are converted to mono if needed before panning. Each script prints a processing report to Praat's Info window.

Serial chains

Signal flow: Original Sound → Stage 1 → Stage 2 → Stage 3 → Stage 4 → Final Sound. Each transformation acts on the result of its predecessor.

CDP Chain 1 (v1.0.1)

Spectral dissolution and resonant extension

A four-stage serial transformation that moves from spectral smoothing through formant inversion and waveset reshaping to a resonant delay tail.

Serial: each stage processes the preceding result

  1. Spectral Blur [spectral_blur]Smears short-time spectral changes.Blurring windows: 50
  2. Invert Formants [sp_fnu_3]Exchanges formant peaks and troughs.Alternation rate: 0; gain: 1
  3. Waveset Reform (exaggerate) [reform_8]Exaggerates individual waveset contours.Exaggeration: 2
  4. Delay with Feedback [echo]Adds repeating, resonant echoes.Delay: 250 ms; mix: 0.5; feedback: 0.4; tail: 2 s; prescale: 0.7; invert dry: off

The first two stages require PVOC analysis/resynthesis, handled automatically by the existing engine. Channel handling follows each process’s requirements.

Script: CDP_Chain_1.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

CDP Chain 2 (v1.0.0)

Granular fragmentation and temporal recomposition

Four serial time-domain processes turn grains into repetitions, rearrange the material, open spaces between events, and recast the result into short advancing loops.

Serial: each stage processes the preceding result

  1. Grain Duplicate [grain_duplicate]Repeats each detected grain twice.Repetitions: 2; gate: 0.3; min gap: 0.032
  2. Scramble (random chunks) [scramble_1]Builds an eight-second collage from randomly selected chunks.Chunk length: 0.05–0.25 s; output: 8 s; splice: 15 ms
  3. Grain Timewarp [grain_timewarp]Expands the spaces between detected grains.Stretch: 1.5; gate: 0.3; min gap: 0.032
  4. Loop (output duration) [loop_2]Creates an approximately ten-second looping output.Output: 10 s; loop length: 250 ms; step: 120 ms; splice: 25 ms

All four stages accept mono and stereo input. The final output is designed to be about 10 seconds long.

Script: CDP_Chain_2.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

CDP Chain 3 (v1.0.0)

Harmonic resonance and spatial echo

A four-stage serial chain turns waveset pitch instability into a resonant harmonic texture, adds pitch-shifted layers, and sends the result into a stereo echo space.

Serial: each stage processes the preceding result

  1. Waveset Pitchwarp [ws_pitch]Randomly changes pitch at the waveset level.Octave range: 0.5; max cycles: 32
  2. Filter Bank (harmonic series) [bank_1]Emphasizes a harmonic series built on A2.Fundamental: 110 Hz; Q: 40; upper frequency: 3500 Hz; tail: 1 s
  3. Stack (transposed copies) [stack]Layers three copies separated by a fifth.Transposition: 7 semitones; copies: 3
  4. Stadium Echo [stadium]Adds an extended stereo echo environment.Echoes: 30; size: 1; roll-off: 1

The first stage requires mono and automatically mixes stereo input down. The Stadium Echo stage generates stereo output.

Script: CDP_Chain_3.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

Parallel compositions

Signal flow: Original Sound → three independently processed branches → equal-power stereo placement and mix → Final stereo Sound. No branch processes the output of another branch.

CDP Composition 1 (v1.0.0)

Three-part spectral space

Three independent spectral treatments of the same original sound are panned and mixed into one stereo texture: blurred halo, low formant-preserved body, and sustained spectral ascent.

Parallel: each branch starts from the original Sound

  1. Left · Spectral Blur [spectral_blur]A smeared spectral halo.Blurring windows: 80; pan: hard left; entry: 0 s
  2. Centre · Transpose (keep formants) [sp_fnu_12]A lower, resonant body derived from the original.Transposition: −12 semitones; fill top: on; gain: 0.5; entry: 0 s
  3. Right · Super Accumulate (free) [sp_superaccu_1]A sustaining, rising spectral layer.Decay: 0.1; glissando: 0.5; pan: hard right; entry: 0 s

The three branches begin together. The stereo mix lasts as long as the longest branch.

Script: CDP_Composition_1.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

CDP Composition 2 (v1.0.1)

Granular canon across the stereo field

Three independently processed versions of the original sound enter in succession, forming a time-domain canon of sparse grains, a dense iterated cloud, and short scrambled fragments.

Parallel: each branch starts from the original Sound

  1. Left · Grain Timewarp [grain_timewarp]Sparse grains with expanded spaces.Stretch: 3; pan: −0.8; entry: 0 s
  2. Centre · Iterate (repetitions) [iterate_2]A dense repeated cloud built from 50 copies.Repetitions: 50; delay: 0.08 s; randomness: 0.6; entry: 1 s
  3. Right · Scramble (random chunks) [scramble_1]A cut-up of the original in a six-second collage.Chunk length: 0.05–0.2 s; output: 6 s; pan: +0.8; entry: 2 s

The three branches run in parallel but enter at 0, 1, and 2 seconds. Iterate uses a repetition count, not a fixed-duration mode, so its length can grow with the source.

Script: CDP_Composition_2.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

CDP Composition 3 (v1.0.0)

Crossing resonances and moving harmonics

A spatial composition with two crossing resonant branches and a central spectral glissando. The stereo positions change continuously while each transformed sound plays.

Parallel: each branch starts from the original Sound

  1. Left → Right · Filter Bank (harmonic series) [bank_1]Glass-like harmonic resonances travel across the stereo field.Fundamental: 440 Hz; Q: 200; gain: 4; start: 0 s
  2. Right → Left · Stack (transposed copies) [stack]A layered chord travels in the opposite direction.Transposition: 7 semitones; copies: 3; start: 0 s
  3. Centre · Spectral Glissando (Shepard tones) [sp_glis_1]An apparently continuous ascent remains centred.Envelope points: 1; glide rate: 1.5; start: 0.5 s

Each branch is trimmed at its quiet ending (using the script’s −60 dB criterion), then dynamically panned across its own duration before the stereo mix.

Script: CDP_Composition_3.praat. Fixed parameters and signal paths are defined in the script; changing them requires editing the script.

Back to top

Presets in version 0.6.0

The optional CDP_Presets.tsv catalogue provides 183 presets for 61 processes across all 14 categories. Each supported process has three named starting points, described alongside its entry below. The other processes retain their existing manual controls.

  1. Choose one of the processes with presets. Its parameter dialog contains a Preset menu, with Standard (defaults) as the first choice.
  2. Choose a named preset and click Load to populate its parameter fields without processing. You can inspect or modify those values before running.
  3. Alternatively, select a different preset and click Apply or OK. The script loads the new preset and processes the original Sound in one action. Apply keeps the dialog open; OK closes it.
  4. To return to the initial settings, choose Standard (defaults). Processes without presets still use the Standards button.

The preset notes below list only values that differ from or explicitly override the standard settings; other parameters take their defaults from CDP_Parameters.tsv. These are exploratory starting points rather than guaranteed results for every recording.

Version 0.6.0 also corrects the handling of the SPECFNU on/off options Fill top, Around trough, Flat, and Up and down.

Time & Pitch (6 processes)

Speed Change

Changes duration and pitch together.

Parameters (defaults): Speed ratio: 0.5.

Speed Change (semitones)

Transposes by semitones; duration changes with pitch.

Parameters (defaults): Semitones: -7.

3 presets available
  • Octave down: An octave lower and twice as long.Overrides: Semitones: -12
  • Fifth up: A fifth higher and shorter.Overrides: Semitones: 7
  • Deep slow: Two octaves down: four times as long.Overrides: Semitones: -24

Accelerate / Decelerate

Speed (and pitch) glides to the ratio Accel, reached at Goal time in the output.

Parameters (defaults): Accel: 2; Goal time: 1.5; Start time: 0.

3 presets available
  • Gentle push: Speeds up slightly towards the end.Overrides: Accel: 1.5; Goal time: 2
  • Rush: A fast acceleration, rising in pitch.Overrides: Accel: 4; Goal time: 1
  • Wind-down: Slows down like a stopping turntable.Overrides: Accel: 0.25; Goal time: 2

Vibrato

Adds pitch vibrato.

Parameters (defaults): Rate: 6; Depth: 0.5.

3 presets available
  • Gentle: A light, vocal vibrato.Overrides: Rate: 5; Depth: 0.2
  • Wide: Slow and wide: the pitch swims.Overrides: Rate: 4; Depth: 1.5
  • Warble: Fast, nervous pitch flutter.Overrides: Rate: 14; Depth: 0.6

Reverse

Plays the sound backwards.

No additional parameters.

Scrub (tape handwinding)

Back-and-forth scrubbing, as when winding tape over a head by hand.

Parameters (defaults): Duration: 4; Lowest transposition: -12; Highest transposition: 4; Single forward scrub: 0.

3 presets available
  • Tape wobble: Small back-and-forth movements around the original pitch.Overrides: Duration: 4; Lowest transposition: -3; Highest transposition: 3
  • Deep scrub: Slow, low hand-winding.Overrides: Duration: 5; Lowest transposition: -24; Highest transposition: -5
  • Squeal: Fast winding, up to an octave higher.Overrides: Duration: 4; Lowest transposition: 0; Highest transposition: 12

Back to top

Radical & Lo-fi (4 processes)

Shred

Cuts the sound into chunks and permutes them, within its own duration.

Parameters (defaults): Repeats: 3; Chunk length: 0.1; Scatter: 1; Smoother output: 0.

3 presets available
  • Light cut-up: Long chunks, one pass: the source stays recognisable.Overrides: Repeats: 1; Chunk length: 0.25; Scatter: 0.5
  • Smooth shuffle: Reordered phrases with softened joins.Overrides: Repeats: 4; Chunk length: 0.15; Scatter: 1; Smoother output: 1
  • Confetti: Many passes over tiny chunks: a granular spray.Overrides: Repeats: 12; Chunk length: 0.04; Scatter: 2

Lose Resolution

Reduces bit depth and/or sample-rate resolution.

Parameters (defaults): Bit resolution: 8; Sample rate division: 4.

3 presets available
  • Retro: Early-sampler grain.Overrides: Bit resolution: 12; Sample rate division: 2
  • Crunch: Audibly reduced, gritty.Overrides: Bit resolution: 6; Sample rate division: 4
  • Ruin: Heavily degraded, aliasing everywhere.Overrides: Bit resolution: 3; Sample rate division: 16

Ring Modulate

Ring modulation against a sine wave, creating sidebands.

Parameters (defaults): Modulating frequency: 150.

3 presets available
  • Tremble: A low ring frequency: rough amplitude flutter.Overrides: Modulating frequency: 25
  • Metallic: Inharmonic sidebands: metallic colour.Overrides: Modulating frequency: 700
  • Glassy: High sidebands: thin and glassy.Overrides: Modulating frequency: 2500

Quantise (bit depth)

Quantises the signal to a given bit resolution (mid-rise).

Parameters (defaults): Bit resolution: 4.

Back to top

Envelope & Dynamics (15 processes)

Gain (factor)

Multiplies the level by a factor.

Parameters (defaults): Gain: 0.5.

Gain (dB)

Changes the level by a number of decibels.

Parameters (defaults): Gain dB: -6.

Normalise (set peak level)

Sets the peak to the given level, raising or lowering the whole Sound.

Parameters (defaults): Peak level: 0.95.

Invert Phase

Inverts the polarity of the signal.

No additional parameters.

Emphasise Attack (at gate level)

Emphasises the attack of the sound.

Parameters (defaults): Gate: 0.3; Attack gain: 1.2; Onset ms: 10; Decay ms: 100; Exponential: 1.

Emphasise Attack (near a time)

Emphasises the attack of the sound.

Parameters (defaults): Approx time: 0.5; Attack gain: 1.2; Onset ms: 10; Decay ms: 100; Exponential: 1.

Emphasise Attack (at exact time)

Emphasises the attack of the sound.

Parameters (defaults): Exact time: 0.5; Attack gain: 1.2; Onset ms: 10; Decay ms: 100; Exponential: 1.

Emphasise Attack (at loudest point)

Emphasises the attack of the sound.

Parameters (defaults): Attack gain: 1.2; Onset ms: 10; Decay ms: 100; Exponential: 1.

3 presets available
  • Accent: A clearer main attack.Overrides: Attack gain: 1.5; Onset ms: 10; Decay ms: 200
  • Punch: A strong, short emphasis.Overrides: Attack gain: 2; Onset ms: 5; Decay ms: 80
  • Snap: A sharp click on the attack.Overrides: Attack gain: 3; Onset ms: 5; Decay ms: 30

Curtail (fade between times)

Fades to zero between two times and cuts the rest.

Parameters (defaults): Fade start: 0.5; Fade end: 1; Exponential: 1.

Curtail (fade duration)

Fades to zero over a duration and cuts the rest.

Parameters (defaults): Fade start: 0.5; Fade duration: 0.5; Exponential: 1.

Curtail steep (fade between times)

As Curtail, with a doubly exponential (steeper) slope.

Parameters (defaults): Fade start: 0.5; Fade end: 1.

Dovetail (fade in and out)

Fades the start in and the end out.

Parameters (defaults): Fade in: 0.05; Fade out: 0.2; Exponential in: 1; Exponential out: 1.

Dovetail steep

Fade in and out with doubly exponential (steeper) slopes.

Parameters (defaults): Fade in: 0.05; Fade out: 0.2.

Swell

Fades in to a peak moment and out from it.

Parameters (defaults): Peak time: 0.5; Exponential: 1.

Tremolo

Amplitude tremolo.

Parameters (defaults): Frequency: 6; Depth: 0.5; Gain: 1.

3 presets available
  • Gentle: A soft pulsation.Overrides: Frequency: 4; Depth: 0.3
  • Chop: Full on/off gating.Overrides: Frequency: 8; Depth: 1
  • Flutter: Fast amplitude flutter, almost a buzz.Overrides: Frequency: 25; Depth: 0.7

Back to top

Waveset Processing (32 processes)

Waveset Reform (fixed-level square)

Replaces each waveset (zero-crossing cycle) by a fixed-level square of the same length.

No additional parameters.

Waveset Reform (square wave)

Replaces each waveset (zero-crossing cycle) by a square wave of the same length.

No additional parameters.

Waveset Reform (fixed-level triangle)

Replaces each waveset (zero-crossing cycle) by a fixed-level triangle of the same length.

No additional parameters.

Waveset Reform (triangle wave)

Replaces each waveset (zero-crossing cycle) by a triangle wave of the same length.

No additional parameters.

Waveset Reform (inverted half-cycles)

Replaces each waveset (zero-crossing cycle) by a inverted half-cycles of the same length.

No additional parameters.

Waveset Reform (click stream)

Replaces each waveset (zero-crossing cycle) by a click stream of the same length.

No additional parameters.

Waveset Reform (sinusoid)

Replaces each waveset (zero-crossing cycle) by a sinusoid of the same length.

No additional parameters.

Waveset Reform (exaggerate)

Exaggerates the contour of each waveset.

Parameters (defaults): Exaggeration: 2.

3 presets available
  • Edge: A little more bite.Overrides: Exaggeration: 1.5
  • Gritty: Rough and distorted.Overrides: Exaggeration: 4
  • Fuzz: Heavy waveset distortion.Overrides: Exaggeration: 12

Waveset Average

Averages the waveshape over groups of wavesets.

Parameters (defaults): Cycles: 4; Max wavelength: 0.5; Skip cycles: 0.

Waveset Delete (keep 1 in N)

Time-contracts the sound by deleting wavesets.

Parameters (defaults): Cycles: 2; Skip cycles: 0.

Waveset Delete (keep strongest of N)

Time-contracts the sound by deleting wavesets.

Parameters (defaults): Cycles: 2; Skip cycles: 0.

Waveset Delete (delete weakest of N)

Time-contracts the sound by deleting wavesets.

Parameters (defaults): Cycles: 2; Skip cycles: 0.

Waveset Divide

Divides waveset frequency (sub-octave distortion).

Parameters (defaults): Divider: 2; Interpolate: 0.

Waveset Multiply

Multiplies waveset frequency.

Parameters (defaults): Multiplier: 2; Smoothing: 0.

Waveset Envelope (rising)

Imposes a rising envelope on each group of wavesets.

Parameters (defaults): Cycles: 4; Troughing: 0; Exponent: 1.

Waveset Envelope (falling)

Imposes a falling envelope on each group of wavesets.

Parameters (defaults): Cycles: 4; Troughing: 0; Exponent: 1.

Waveset Envelope (troughed)

Imposes a troughed envelope on each group of wavesets.

Parameters (defaults): Cycles: 4; Troughing: 0.5; Exponent: 1.

Waveset Filter (omit below)

Omits wavesets below a frequency (time-contracts).

Parameters (defaults): Frequency: 300; Skip cycles: 0.

Waveset Filter (omit above)

Omits wavesets above a frequency (time-contracts).

Parameters (defaults): Frequency: 1000; Skip cycles: 0.

Waveset Filter (keep band)

Omits wavesets below Low and above High.

Parameters (defaults): Low frequency: 200; High frequency: 1000; Skip cycles: 0.

Waveset Fractal

Superimposes miniature copies of each waveset onto itself.

Parameters (defaults): Scaling: 4; Loudness: 0.5; Pre attenuation: 1.

Waveset Interpolate

Time-stretches by repeating wavesets and interpolating between them.

Parameters (defaults): Multiplier: 2; Skip cycles: 0.

Waveset Omit

Replaces A of every B wavesets by silence.

Parameters (defaults): Omit: 1; Out of: 3.

3 presets available
  • Pitted: Every fourth waveset silenced: a light rasp.Overrides: Omit: 1; Out of: 4
  • Half holes: Every other waveset silenced: buzzy and thin.Overrides: Omit: 1; Out of: 2
  • Dust: Only one waveset in eight remains.Overrides: Omit: 7; Out of: 8

Waveset Overload (noise)

Clips the signal and fills clipped stretches with noise.

Parameters (defaults): Clip level: 0.3; Depth: 0.5.

Waveset Overload (waveform)

Clips the signal and fills clipped stretches with a waveform.

Parameters (defaults): Clip level: 0.3; Depth: 0.5; Frequency: 400.

3 presets available
  • Soft buzz: Peaks replaced by a low buzz.Overrides: Clip level: 0.5; Depth: 0.3; Frequency: 200
  • Fuzz: Strong clipping filled with a tone.Overrides: Clip level: 0.2; Depth: 0.7; Frequency: 800
  • Whistle: Almost everything becomes a high tone.Overrides: Clip level: 0.1; Depth: 1; Frequency: 1500

Waveset Pitchwarp

Randomly transposes wavesets.

Parameters (defaults): Octave range: 0.5; Max cycles: 64; Skip cycles: 0.

3 presets available
  • Wobble: Slight, slow pitch instability.Overrides: Octave range: 0.1; Max cycles: 128
  • Unstable: Clearly wandering pitch.Overrides: Octave range: 0.5; Max cycles: 32
  • Chaos: Rapid jumps over two octaves.Overrides: Octave range: 2; Max cycles: 8

Waveset Repeat (stretch)

Time-stretches by repeating wavesets.

Parameters (defaults): Multiplier: 2; Group size: 1; Skip cycles: 0.

3 presets available
  • Doubled: Each small group of wavesets twice: a soft stretch.Overrides: Multiplier: 2; Group size: 4
  • Grain smear: Longer groups, four times: audible granular plateaus.Overrides: Multiplier: 4; Group size: 16
  • Waveset drone: Single cycles repeated: pitched buzz (output about 6x longer).Overrides: Multiplier: 6; Group size: 1

Waveset Repeat (no stretch)

Repeats wavesets without time-stretching.

Parameters (defaults): Multiplier: 2; Group size: 1; Skip cycles: 0.

Waveset Repeat (below frequency)

Time-stretches by repeating wavesets below a frequency.

Parameters (defaults): Multiplier: 2; Group size: 1; Skip cycles: 0; Frequency limit: 500.

Waveset Replace

The strongest waveset in each group replaces the others.

Parameters (defaults): Cycles: 4; Skip cycles: 0.

Waveset Reverse

Reverses wavesets in groups.

Parameters (defaults): Cycles: 4.

Waveset Telescope

Time-contracts by telescoping groups of wavesets into one.

Parameters (defaults): Cycles: 4; Skip cycles: 0; Average length: 0.

Back to top

Extend & Loop (11 processes)

Back to Back

Joins a reversed copy to a normal copy of the sound.

Parameters (defaults): Join time: 0.5; Splice ms: 20.

Doublets

Cuts the sound into segments and repeats each.

Parameters (defaults): Segment duration: 0.2; Repeats: 2; Stay in sync: 0.

3 presets available
  • Stutter: Each short segment twice.Overrides: Segment duration: 0.1; Repeats: 2
  • Echo pairs: Longer segments, three times.Overrides: Segment duration: 0.25; Repeats: 3
  • Machine gun: Tiny segments, many repeats.Overrides: Segment duration: 0.04; Repeats: 6

Drunken Walk

Splices segments chosen by a drunken walk through the sound.

Parameters (defaults): Output duration: 8; Locus: 0.5; Ambitus: 0.4; Step: 0.1; Clock: 0.15; Splice ms: 15; Clock randomness: 0; Overlap: 0; Seed: 0.

3 presets available
  • Stagger: Small steps around the locus: hesitant continuity.Overrides: Output duration: 8; Ambitus: 0.2; Step: 0.05; Clock: 0.2; Clock randomness: 0.1
  • Wander: A long walk across a wide region, overlapping.Overrides: Output duration: 12; Ambitus: 1; Step: 0.2; Clock: 0.12; Clock randomness: 0.4; Overlap: 0.3
  • Stutter: Fast, regular clock on tiny steps: a machine stutter.Overrides: Output duration: 6; Ambitus: 0.1; Step: 0.02; Clock: 0.04; Clock randomness: 0

Freeze

Freezes a segment by fluid iteration.

Parameters (defaults): Output duration: 6; Delay: 0.05; Delay randomness: 0.2; Pitch shift: 0.5; Amp cut: 0.2; Segment start: 0.2; Segment end: 0.4; Gain: 1; Seed: 0.

3 presets available
  • Held breath: A still, near-continuous hold of the segment.Overrides: Output duration: 6; Delay: 0.04; Delay randomness: 0.05; Pitch shift: 0; Amp cut: 0.1
  • Shimmer: Unsteady repetitions with a little pitch flutter.Overrides: Output duration: 8; Delay: 0.03; Delay randomness: 0.5; Pitch shift: 1.5; Amp cut: 0.3
  • Rubble: Irregular, widely re-pitched fragments.Overrides: Output duration: 8; Delay: 0.12; Delay randomness: 0.9; Pitch shift: 7; Amp cut: 0.7

Iterate (duration)

Iterates the whole sound in a fluid manner.

Parameters (defaults): Output duration: 8; Delay: 0.3; Delay randomness: 0.2; Pitch shift: 1; Amp cut: 0.2; Fade: 0; Gain: 0; Seed: 0.

3 presets available
  • Echo trail: Regular repetitions that slowly fade.Overrides: Output duration: 6; Delay: 0.4; Delay randomness: 0.1; Pitch shift: 0; Amp cut: 0.1; Fade: 0.3
  • Cloud: Dense overlapping copies, slightly detuned.Overrides: Output duration: 10; Delay: 0.08; Delay randomness: 0.6; Pitch shift: 2; Amp cut: 0.4
  • Scattered: Sparse, unpredictable, widely re-pitched.Overrides: Output duration: 10; Delay: 0.6; Delay randomness: 1; Pitch shift: 12; Amp cut: 0.8

Iterate (repetitions)

Iterates the whole sound in a fluid manner.

Parameters (defaults): Repetitions: 8; Delay: 0.3; Delay randomness: 0.2; Pitch shift: 1; Amp cut: 0.2; Fade: 0; Gain: 0; Seed: 0.

Loop (advance through sound)

Loops segments that advance through the sound until it is exhausted.

Parameters (defaults): Start: 0; Loop length ms: 200; Step ms: 50; Splice ms: 25; Scatter: 0; Play from start: 0.

Loop (output duration)

Loops a segment to the given output duration.

Parameters (defaults): Output duration: 6; Start: 0; Loop length ms: 200; Step ms: 0; Splice ms: 25; Scatter: 0; Play from start: 0.

3 presets available
  • Buzz loop: A 50 ms loop with tiny splices: a pitched buzz.Overrides: Output duration: 4; Loop length ms: 50; Splice ms: 5
  • Phrase loop: A half-second loop.Overrides: Output duration: 6; Loop length ms: 500
  • Creeping: A short loop that moves slowly through the sound.Overrides: Output duration: 6; Loop length ms: 150; Step ms: 20

Loop (repeat count)

Loops a segment a number of times.

Parameters (defaults): Repeats: 10; Start: 0; Loop length ms: 200; Step ms: 0; Splice ms: 25; Scatter: 0; Play from start: 0.

Scramble (random chunks)

Cuts random chunks and splices them end to end.

Parameters (defaults): Min chunk: 0.05; Max chunk: 0.3; Output duration: 6; Splice ms: 25; Seed: 0; Start at beginning: 0; End at end: 0.

3 presets available
  • Phrase shuffle: Longer chunks: recognisable fragments.Overrides: Min chunk: 0.2; Max chunk: 0.6; Output duration: 6
  • Cut-up: Short chunks: a busy collage.Overrides: Min chunk: 0.05; Max chunk: 0.2; Output duration: 6
  • Micro: Tiny chunks: a granular texture.Overrides: Min chunk: 0.031; Max chunk: 0.06; Output duration: 5; Splice ms: 5

Zigzag

Reads back and forth inside the sound at random.

Parameters (defaults): Zone start: 0.2; Zone end: 1.2; Output duration: 6; Min zig: 0.1; Splice ms: 25; Seed: 0.

Back to top

Filters (21 processes)

Boost/Cut below

Boosts or cuts below a frequency.

Parameters (defaults): Boost or cut dB: -12; Frequency: 500; Tail: 0; Prescale: 1.

Boost/Cut above

Boosts or cuts above a frequency.

Parameters (defaults): Boost or cut dB: -12; Frequency: 500; Tail: 0; Prescale: 1.

Boost/Cut band

Boosts or cuts a band around a frequency.

Parameters (defaults): Bandwidth: 200; Boost or cut dB: 12; Frequency: 1000; Tail: 0; Prescale: 0.5.

Low/High-pass (Hz)

Low-pass if Stop band is above Pass band, high-pass if below.

Parameters (defaults): Attenuation dB: -60; Pass band: 1000; Stop band: 1500; Tail: 0; Prescale: 1.

3 presets available
  • Muffled: Low-pass: as if through a wall.Overrides: Pass band: 500; Stop band: 800
  • Dark: Low-pass: softened top.Overrides: Pass band: 1500; Stop band: 2500
  • Thin: High-pass: only the upper range.Overrides: Pass band: 2000; Stop band: 1500

Low/High-pass (MIDI)

Low-pass if Stop band is above Pass band, high-pass if below (MIDI pitches).

Parameters (defaults): Attenuation dB: -60; Pass band: 72; Stop band: 76; Tail: 0; Prescale: 1.

Variable notch

Resonant notch filter.

Parameters (defaults): Acuity: 0.05; Gain: 1; Frequency: 1000; Tail: 0.

Variable band-pass

Resonant band-pass filter.

Parameters (defaults): Acuity: 0.05; Gain: 1; Frequency: 1000; Tail: 0.

Variable low-pass

Resonant low-pass filter.

Parameters (defaults): Acuity: 0.05; Gain: 1; Frequency: 1000; Tail: 0.

Variable high-pass

Resonant high-pass filter.

Parameters (defaults): Acuity: 0.05; Gain: 1; Frequency: 1000; Tail: 0.

Filter Bank (harmonic series)

Bank of resonant filters: harmonic series.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Tail: 0; Scatter: 0; Double filtering: 0.

3 presets available
  • Warm body: Broad resonances on the harmonics of A2, a short ring.Overrides: Q: 8; Low frequency: 110; High frequency: 3000; Tail: 1
  • Glass harmonics: Narrow, ringing bands on the harmonics of A4.Overrides: Q: 200; Gain: 4; Low frequency: 440; High frequency: 8000
  • Low drone: Dense low harmonic series with a resonant tail.Overrides: Q: 100; Gain: 2; Low frequency: 55; High frequency: 1500; Tail: 2

Filter Bank (alternate harmonics)

Bank of resonant filters: alternate harmonics.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Tail: 0; Scatter: 0; Double filtering: 0.

Filter Bank (subharmonic series)

Bank of resonant filters: subharmonic series.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Tail: 0; Scatter: 0; Double filtering: 0.

Filter Bank (harmonics + offset)

Bank of resonant filters: harmonics + offset.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Offset Hz: 50; Tail: 0; Scatter: 0; Double filtering: 0.

Filter Bank (equal intervals, count)

Bank of resonant filters: equal intervals, count.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Number of filters: 8; Tail: 0; Scatter: 0; Double filtering: 0.

Filter Bank (equal intervals, semitones)

Bank of resonant filters: equal intervals, semitones.

Parameters (defaults): Q: 20; Gain: 1; Low frequency: 110; High frequency: 4000; Interval: 3; Tail: 0; Scatter: 0; Double filtering: 0.

3 presets available
  • Whole-tone cloud: Resonances a whole tone apart.Overrides: Q: 40; Low frequency: 110; High frequency: 4000; Interval: 2
  • Minor thirds: Narrow resonances a minor third apart.Overrides: Q: 80; Low frequency: 110; High frequency: 4000; Interval: 3
  • Quarter-tone haze: Dense quarter-tone resonances.Overrides: Q: 30; Low frequency: 200; High frequency: 3000; Interval: 0.5

Sweeping notch

Filter whose frequency sweeps between Low and High.

Parameters (defaults): Acuity: 0.05; Gain: 1; Low frequency: 200; High frequency: 4000; Sweep rate: 0.5; Tail: 0; Start phase: 0.25.

Sweeping band-pass

Filter whose frequency sweeps between Low and High.

Parameters (defaults): Acuity: 0.05; Gain: 1; Low frequency: 200; High frequency: 4000; Sweep rate: 0.5; Tail: 0; Start phase: 0.25.

3 presets available
  • Slow wah: A slow band-pass sweep.Overrides: Acuity: 0.05; Gain: 0.5; Low frequency: 200; High frequency: 3000; Sweep rate: 0.25
  • Fast wah: A quick, rhythmic sweep.Overrides: Acuity: 0.05; Gain: 0.5; Low frequency: 300; High frequency: 2500; Sweep rate: 4
  • Whistle sweep: A very narrow band: a sweeping whistle.Overrides: Acuity: 0.005; Gain: 0.3; Low frequency: 400; High frequency: 4000; Sweep rate: 0.2

Sweeping low-pass

Filter whose frequency sweeps between Low and High.

Parameters (defaults): Acuity: 0.05; Gain: 1; Low frequency: 200; High frequency: 4000; Sweep rate: 0.5; Tail: 0; Start phase: 0.25.

Sweeping high-pass

Filter whose frequency sweeps between Low and High.

Parameters (defaults): Acuity: 0.05; Gain: 1; Low frequency: 200; High frequency: 4000; Sweep rate: 0.5; Tail: 0; Start phase: 0.25.

Allpass (phase shift)

Allpass (phase shift).

Parameters (defaults): Gain: 0.5; Delay ms: 5; Tail: 0; Prescale: 1; Linear interpolation: 0.

Phasing

Phasing.

Parameters (defaults): Gain: 0.5; Delay ms: 5; Tail: 0; Prescale: 1; Linear interpolation: 0.

3 presets available
  • Soft phase: A light phasing colour.Overrides: Gain: 0.3; Delay ms: 3
  • Deep phase: Strong, hollow phasing.Overrides: Gain: 0.7; Delay ms: 8
  • Hollow: Negative gain: a thinner, nasal colour.Overrides: Gain: -0.6; Delay ms: 2

Back to top

Echo & Resonance (4 processes)

Delay with Feedback

Delay with feedback; short delays resonate.

Parameters (defaults): Delay ms: 250; Mix: 0.5; Feedback: 0.4; Tail: 2; Prescale: 0.7; Invert dry: 0.

3 presets available
  • Slapback: One short, close repeat.Overrides: Delay ms: 90; Mix: 0.35; Feedback: 0.1; Tail: 0.5
  • Dub space: Long, regenerating echoes.Overrides: Delay ms: 375; Mix: 0.5; Feedback: 0.65; Tail: 6
  • Flutter: Very short feedback: metallic, comb-like ringing.Overrides: Delay ms: 28; Mix: 0.5; Feedback: 0.75; Tail: 2

Delay with LFO

Delay whose time is swept by a low-frequency oscillator (chorus, flanging).

Parameters (defaults): Delay ms: 20; Mix: 0.5; Feedback: 0.3; LFO depth: 0.5; LFO rate: 0.5; LFO phase: 0; LFO delay: 0; Tail: 1; Prescale: 0.7; Seed: 0.

3 presets available
  • Chorus: A gently moving double.Overrides: Delay ms: 20; Mix: 0.5; Feedback: 0; LFO depth: 0.3; LFO rate: 0.8
  • Flanger: A sweeping jet-like comb.Overrides: Delay ms: 3; Mix: 0.5; Feedback: 0.7; LFO depth: 0.8; LFO rate: 0.25
  • Wobble echo: Echoes with unsteady timing.Overrides: Delay ms: 150; Mix: 0.5; Feedback: 0.5; LFO depth: 0.2; LFO rate: 2; Tail: 2

Stadium Echo

Stadium PA-type echoes.

Parameters (defaults): Gain: 0.645654; Roll off: 1; Size: 1; Echoes: 40; Normalise: 1.

3 presets available
  • Small hall: Short, close echoes.Overrides: Size: 0.3; Echoes: 15
  • Arena: Wide, long echo field.Overrides: Size: 2; Echoes: 80
  • Canyon: Distant, widely spaced echoes.Overrides: Size: 4; Echoes: 60

Stack (transposed copies)

Mixes transposed copies of the sound on top of each other.

Parameters (defaults): Transposition: 3; Copies: 4; Lean: 0.5; Attack time: 0; Gain: 1; Proportion: 1; Normalise: 1.

3 presets available
  • Fifths: Three copies a fifth apart.Overrides: Transposition: 7; Copies: 3; Lean: 0.5
  • Octave tower: Four octaves, the upper ones softer.Overrides: Transposition: 12; Copies: 4; Lean: 0.3
  • Microtonal smear: Eight copies a few cents apart: chorus-like beating.Overrides: Transposition: 0.3; Copies: 8; Lean: 1

Back to top

Granular (10 processes)

Grain Omit

Keeps Keep grains out of every Out of.

Parameters (defaults): Keep: 1; Out of: 2; Gate: 0.3; Min gap: 0.032; Ignore last grain: 0.

Grain Duplicate

Repeats each grain.

Parameters (defaults): Repetitions: 2; Gate: 0.3; Min gap: 0.032; Ignore last grain: 0.

3 presets available
  • Triple: Each grain three times.Overrides: Repetitions: 3
  • Stammer: Each grain six times.Overrides: Repetitions: 6
  • Loud grains only: Only the strongest grains, four times each.Overrides: Repetitions: 4; Gate: 0.6

Grain Reverse Order

Reverses the order of grains, not the grains themselves.

Parameters (defaults): Gate: 0.3; Min gap: 0.032; Ignore last grain: 0.

Grain Timewarp

Stretches the time between grains, not the grains.

Parameters (defaults): Stretch: 2; Gate: 0.3; Min gap: 0.032; Ignore last grain: 0.

3 presets available
  • Breathing: A little more space between grains.Overrides: Stretch: 1.5
  • Sparse: Grains far apart.Overrides: Stretch: 4
  • Rushed: Grains pushed together.Overrides: Stretch: 0.5

Grain Units Reverse

Finds grains at envelope troughs and reverses their order (good for syllables).

Parameters (defaults): Window ms: 50; Trough: 0.5; Group size: 1.

Grain Units Repeat

Repeats each unit found at envelope troughs.

Parameters (defaults): Window ms: 50; Trough: 0.5; Group size: 1; Repetitions: 2.

Grain Units Delete

Keeps Keep units out of every Out of and removes the rest.

Parameters (defaults): Window ms: 50; Trough: 0.5; Group size: 1; Keep: 2; Out of: 3.

Grain Units Omit

Keeps Keep units out of every Out of and silences the rest.

Parameters (defaults): Window ms: 50; Trough: 0.5; Group size: 1; Keep: 2; Out of: 3.

Grain Units Timestretch

Time-stretches without stretching the units.

Parameters (defaults): Window ms: 50; Trough: 0.5; Group size: 1; Stretch: 2.

3 presets available
  • Gentle stretch: A little longer, units intact.Overrides: Stretch: 1.5
  • Slow: Four times as long, units intact.Overrides: Stretch: 4
  • Faster: Half as long, units intact.Overrides: Stretch: 0.5

Noise Extend

Finds the noise component (e.g. consonants) and time-stretches it.

Parameters (defaults): Noise duration: 3; Min frequency: 2000; Min duration ms: 20; Max duration: 1; Keep only noise: 0.

Back to top

Spectral Blur & Noise (14 processes)

Spectral Blur

Time-averages the spectrum.

Parameters (defaults): Blurring windows: 50.

3 presets available
  • Haze: Light time-smearing of the spectrum.Overrides: Blurring windows: 8
  • Wash: Attacks dissolve; the spectrum flows.Overrides: Blurring windows: 80
  • Fog: Only the slowly changing colour remains.Overrides: Blurring windows: 300

Spectral Average (channels)

Averages spectral energy over N adjacent channels.

Parameters (defaults): Channels: 9.

Suppress Loudest Partials

Removes the N loudest partials in every window.

Parameters (defaults): Partials: 4.

Spectral Chorus (amplitudes)

Randomises partial amplitudes.

Parameters (defaults): Amp scatter: 5.

Spectral Chorus (frequencies)

Randomises partial frequencies.

Parameters (defaults): Frq scatter: 1.5.

Spectral Chorus (frequencies up)

Randomises partial frequencies up.

Parameters (defaults): Frq scatter: 1.5.

Spectral Chorus (frequencies down)

Randomises partial frequencies down.

Parameters (defaults): Frq scatter: 1.5.

Spectral Chorus (amps + frequencies)

Randomises partial amplitudes and frequencies.

Parameters (defaults): Amp scatter: 5; Frq scatter: 1.5.

3 presets available
  • Shimmer: Subtle movement in the partials.Overrides: Amp scatter: 2; Frq scatter: 1.1
  • Choir: Many slightly different voices.Overrides: Amp scatter: 8; Frq scatter: 1.3
  • Chaos: Strongly scrambled partials.Overrides: Amp scatter: 50; Frq scatter: 3

Spectral Chorus (amps + frequencies up)

Randomises partial amplitudes and frequencies.

Parameters (defaults): Amp scatter: 5; Frq scatter: 1.5.

Spectral Chorus (amps + frequencies down)

Randomises partial amplitudes and frequencies.

Parameters (defaults): Amp scatter: 5; Frq scatter: 1.5.

Spectral Drunken Walk

Drunken walk along the analysis windows.

Parameters (defaults): Max step: 10; Start time: 0; Output duration: 4; No repeats: 0.

3 presets available
  • Hesitant: Small steps: a trembling, smeared sound.Overrides: Max step: 3; Output duration: 4
  • Wanderer: Wider steps through the sound.Overrides: Max step: 30; Output duration: 6
  • Lurch: Large jumps, never standing still.Overrides: Max step: 100; Output duration: 6; No repeats: 1

Spectral Noise

Puts noise into the spectrum.

Parameters (defaults): Noise: 0.3.

Spectral Scatter

Randomly thins out the spectrum.

Parameters (defaults): Blocks kept: 20; Random count: 0; No normalisation: 0.

Spectral Spread

Spreads spectral peaks, adding controlled noisiness.

Parameters (defaults): Envelope points: 1; Spread: 1.

Back to top

Spectral Focus & Sustain (9 processes)

Accumulate (sustain bands)

Sustains each spectral band until louder data appears in it.

Parameters (defaults): Decay: 0.5; Glissando: 0.

3 presets available
  • Brief ring: Bands sustain briefly.Overrides: Decay: 0.1
  • Rising ring: Sustained bands glide upward.Overrides: Decay: 0.15; Glissando: 0.3
  • Falling ring: Sustained bands glide downward.Overrides: Decay: 0.15; Glissando: -0.3

Exaggerate Contour

Exaggerates the spectral contour (>0 widens troughs, <0 peaks).

Parameters (defaults): Exaggeration: 2.

Focus on Peaks

Focuses spectral energy onto the strongest peaks.

Parameters (defaults): Envelope points: 1; Peaks: 4; Bandwidth: 0.2; Stability: 9.

3 presets available
  • Two peaks: Energy concentrated on two narrow peaks.Overrides: Peaks: 2; Bandwidth: 0.1
  • Vowel focus: Four broad, stable peaks.Overrides: Peaks: 4; Bandwidth: 0.5; Stability: 20
  • Many peaks: Twelve narrow peaks.Overrides: Peaks: 12; Bandwidth: 0.15

Fold into Range

Octave-transposes spectral components into a frequency range.

Parameters (defaults): Low frequency: 200; High frequency: 800; Fuller spectrum: 0.

3 presets available
  • Bass fold: Everything folded into two low octaves.Overrides: Low frequency: 80; High frequency: 320
  • Narrow octave: Everything folded into one octave.Overrides: Low frequency: 300; High frequency: 600
  • Bright fold: Folded high, with a fuller spectrum.Overrides: Low frequency: 1000; High frequency: 4000; Fuller spectrum: 1

Step-Frame

Steps through the sound by freezing the spectrum at regular intervals.

Parameters (defaults): Step: 0.1.

3 presets available
  • Strobe: Fast frozen frames.Overrides: Step: 0.05
  • Slideshow: Clear frozen frames.Overrides: Step: 0.25
  • Tableaux: Long, held images.Overrides: Step: 0.6

Super Accumulate (free)

Sustains spectral bands.

Parameters (defaults): Decay: 0.05; Glissando: 0; Reassign gliss: 0.

3 presets available
  • Short halo: Bands ring on only briefly: a light halo.Overrides: Decay: 0.005
  • Rising glow: Sustained bands that slowly glide upward.Overrides: Decay: 0.1; Glissando: 0.5
  • Sinking glow: Sustained bands that slowly glide downward.Overrides: Decay: 0.1; Glissando: -0.4

Super Accumulate (tempered)

Sustains spectral bands, resonances forced to the tempered scale.

Parameters (defaults): Decay: 0.05; Glissando: 0; Reassign gliss: 0.

Glisten

Plays random sets of spectral channels in turn.

Parameters (defaults): Sets: 4; Set windows: 10; Pitch shift: 0; Duration rand: 0; Set size rand: 0.

3 presets available
  • Glitter: Quick flickering sets of partials.Overrides: Sets: 8; Set windows: 4
  • Slow flicker: Large sets, changing slowly.Overrides: Sets: 2; Set windows: 40
  • Pitched sparks: Flickering sets with random transposition.Overrides: Sets: 4; Set windows: 10; Pitch shift: 7; Duration rand: 0.5

Blur Upper Spectrum

Time-blurs the spectrum above a frequency.

Parameters (defaults): Blur time: 0.2; Above frequency: 1000.

Back to top

Spectral Filter & Trace (26 processes)

Spectral Filter (high-pass)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100.

Spectral Filter (high-pass, normalised)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100.

Spectral Filter (low-pass)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100.

Spectral Filter (low-pass, normalised)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100.

Spectral Filter (high-pass + gain)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100; Gain: 1.

Spectral Filter (low-pass + gain)

Filters the spectrum.

Parameters (defaults): Cutoff: 1000; Skirt: 100; Gain: 1.

Spectral Filter (band-pass)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100.

Spectral Filter (band-pass, normalised)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100.

Spectral Filter (notch)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100.

Spectral Filter (notch, normalised)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100.

Spectral Filter (band-pass + gain)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100; Gain: 1.

Spectral Filter (notch + gain)

Filters the spectrum.

Parameters (defaults): Low frequency: 500; High frequency: 2000; Skirt: 100; Gain: 1.

Trace Loudest Partials

Keeps only the N loudest partials in every window.

Parameters (defaults): Partials: 10.

3 presets available
  • Skeleton: Only the three loudest partials.Overrides: Partials: 3
  • Sparse: A thinned, transparent spectrum.Overrides: Partials: 12
  • Cleaned: Removes low-level noise, keeps the body.Overrides: Partials: 60

Trace (above frequency)

Keeps the N loudest partials above a frequency.

Parameters (defaults): Partials: 10; Low frequency: 300; Retain outside: 0.

Trace (below frequency)

Keeps the N loudest partials below a frequency.

Parameters (defaults): Partials: 10; High frequency: 2000; Retain outside: 0.

Trace (in band)

Keeps the N loudest partials within a band.

Parameters (defaults): Partials: 10; Low frequency: 300; High frequency: 2000; Retain outside: 0.

Blur and Trace

Time-averages the spectrum and keeps the loudest channels.

Parameters (defaults): Blurring windows: 10; Channels kept: 20.

3 presets available
  • Soft trace: Lightly smoothed and cleaned.Overrides: Blurring windows: 5; Channels kept: 40
  • Ghost: Blurred, few partials.Overrides: Blurring windows: 30; Channels kept: 8
  • Thread: A slow thread of three partials.Overrides: Blurring windows: 100; Channels kept: 3

Pluck (new partials)

Emphasises newly prominent spectral components.

Parameters (defaults): Gain: 2.

Arpeggiate (band only)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (boost band)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (below, then boost)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (above, then boost)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (band and below)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (band and above)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (once below)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Arpeggiate (once above)

Arpeggiates the spectrum with a sweeping band.

Parameters (defaults): Wave: 2; Sweeps per s: 2; Amplification: 10.

Back to top

Spectral Pitch & Shift (28 processes)

Frequency Shift (whole)

Linear frequency shift of the whole spectrum (inharmonic).

Parameters (defaults): Shift: 100; Log interpolation: 0.

3 presets available
  • Metallic: Small shift: harmonics become inharmonic.Overrides: Shift: 60
  • Bell: Larger shift: bright, bell-like partials.Overrides: Shift: 350
  • Undertone: Downward shift: hollow, darker partials.Overrides: Shift: -150

Frequency Shift (above split)

Linear frequency shift of the spectrum above a frequency.

Parameters (defaults): Shift: 100; Split frequency: 1000; Log interpolation: 0.

Frequency Shift (below split)

Linear frequency shift of the spectrum below a frequency.

Parameters (defaults): Shift: 100; Split frequency: 1000; Log interpolation: 0.

Frequency Shift (inside band)

Linear frequency shift inside band.

Parameters (defaults): Shift: 100; Low frequency: 500; High frequency: 2000; Log interpolation: 0.

Frequency Shift (outside band)

Linear frequency shift outside band.

Parameters (defaults): Shift: 100; Low frequency: 500; High frequency: 2000; Log interpolation: 0.

Spectral Glissando (Shepard tones)

Glissandi inside the changing spectral envelope.

Parameters (defaults): Envelope points: 1; Glide rate: 6.

3 presets available
  • Slow spiral: A slow, endless (Shepard) rise.Overrides: Glide rate: 1.5
  • Fast spiral: A quick endless rise.Overrides: Glide rate: 12
  • Falling spiral: An endless fall.Overrides: Glide rate: -4

Spectral Glissando (self-glissando)

Glissandi inside the changing spectral envelope.

Parameters (defaults): Envelope points: 1; Glide rate: 6.

Spectral Glissando (inharmonic)

Inharmonic glide inside the spectral envelope.

Parameters (defaults): Envelope points: 1; Glide rate: 6; Partial spacing: 200.

Spectral Invert (normal)

Inverts the spectrum.

No additional parameters.

Spectral Invert (keep envelope)

Inverts the spectrum.

No additional parameters.

Waver (harmonic/inharmonic)

Oscillates between harmonic and inharmonic states.

Parameters (defaults): Oscillation: 2; Stretch: 1.5; Above frequency: 200.

3 presets available
  • Gentle waver: Slight harmonic/inharmonic movement.Overrides: Oscillation: 1; Stretch: 1.2
  • Seasick: Slow, strong movement.Overrides: Oscillation: 0.5; Stretch: 2
  • Fast shimmer: Fast inharmonic shimmer.Overrides: Oscillation: 6; Stretch: 1.3

Waver (custom stretch)

Oscillates between harmonic and inharmonic states.

Parameters (defaults): Oscillation: 2; Stretch: 1.5; Above frequency: 200; Exponent: 1.

Stretch Spectrum (above)

Stretches the spectral frequencies above a split frequency (inharmonic).

Parameters (defaults): Split frequency: 500; Max stretch: 1.5; Exponent: 1; Depth: 1.

3 presets available
  • Slight inharmonic: Upper partials slightly stretched.Overrides: Split frequency: 500; Max stretch: 1.2
  • Bell stretch: Strongly stretched: bell-like.Overrides: Split frequency: 300; Max stretch: 2
  • Compressed: Upper partials squeezed together.Overrides: Split frequency: 500; Max stretch: 0.7

Stretch Spectrum (below)

Stretches the spectral frequencies below a split frequency (inharmonic).

Parameters (defaults): Split frequency: 500; Max stretch: 1.5; Exponent: 1; Depth: 1.

Spectral Time-Stretch

Time-stretches without changing pitch.

Parameters (defaults): Stretch: 2.

3 presets available
  • Slightly slower: A gentle stretch, same pitch.Overrides: Stretch: 1.3
  • Slow motion: Six times as long: inner details become audible.Overrides: Stretch: 6
  • Compress: Half as long, same pitch.Overrides: Stretch: 0.5

Spectral Transpose (octave up above split)

Shifts the pitch of part of the spectrum.

Parameters (defaults): Split frequency: 500; Depth: 1.

Spectral Transpose (octave down below split)

Shifts the pitch of part of the spectrum.

Parameters (defaults): Split frequency: 500; Depth: 1.

Spectral Transpose (octaves up and down)

Shifts the pitch of part of the spectrum.

Parameters (defaults): Split frequency: 500; Depth: 1.

Spectral Transpose (up above split)

Shifts the pitch of part of the spectrum.

Parameters (defaults): Split frequency: 500; Semitones: 7; Depth: 1.

Spectral Transpose (down below split)

Shifts the pitch of part of the spectrum.

Parameters (defaults): Split frequency: 500; Semitones: 7; Depth: 1.

Spectral Transpose (up and down)

Shifts the spectrum above and below a split frequency.

Parameters (defaults): Split frequency: 500; Semitones above: 7; Semitones below: -5; Depth: 1.

3 presets available
  • Octave spread: High part up an octave, low part down.Overrides: Split frequency: 500; Semitones above: 12; Semitones below: -12
  • Fourths: A milder pull apart.Overrides: Split frequency: 500; Semitones above: 5; Semitones below: -7
  • Cluster: Slight detuning around the split.Overrides: Split frequency: 500; Semitones above: 1; Semitones below: -1

Pick Partials (harmonic series)

Keeps only the channels that may hold the given partials.

Parameters (defaults): Fundamental: 220; Clarity: 1.

3 presets available
  • A1 series: Only partials on the A1 harmonic series.Overrides: Fundamental: 55; Clarity: 1
  • A2 series: Only partials on the A2 harmonic series.Overrides: Fundamental: 110; Clarity: 1
  • E4 series: A sparse, high harmonic sieve.Overrides: Fundamental: 330; Clarity: 0.5

Pick Partials (octaves)

Keeps only the channels that may hold the given partials.

Parameters (defaults): Fundamental: 220; Clarity: 1.

Pick Partials (odd harmonics)

Keeps only the channels that may hold the given partials.

Parameters (defaults): Fundamental: 220; Clarity: 1.

Pick Partials (linear steps)

Keeps only the channels that may hold the given partials.

Parameters (defaults): Fundamental: 220; Frequency step: 50; Clarity: 1.

Pick Partials (displaced harmonics)

Keeps only the channels that may hold the given partials.

Parameters (defaults): Fundamental: 220; Frequency step: 50; Clarity: 1.

Tune to Pitch (Hz)

Replaces spectral frequencies by harmonics of a pitch.

Parameters (defaults): Pitch: 220; Focus: 1; Clarity: 0.

Tune to Pitch (MIDI)

Replaces spectral frequencies by harmonics of a pitch.

Parameters (defaults): MIDI pitch: 57; Focus: 1; Clarity: 0.

3 presets available
  • Low C: Retuned to the harmonics of C2.Overrides: MIDI pitch: 36; Focus: 1; Clarity: 0.3
  • Middle C: Retuned to the harmonics of C4.Overrides: MIDI pitch: 60; Focus: 1; Clarity: 0.5
  • High A: Clearly retuned to A4.Overrides: MIDI pitch: 69; Focus: 1; Clarity: 1

Back to top

Spectral Edit (7 processes)

Spectral Gain

Amplifies or attenuates the spectrum.

Parameters (defaults): Gain: 0.5.

Spectral Gate

Removes channel data below a threshold.

Parameters (defaults): Threshold: 0.01.

3 presets available
  • Clean: Removes faint spectral noise.Overrides: Threshold: 0.005
  • Sparse: Only the stronger components remain.Overrides: Threshold: 0.05
  • Skeleton: Only the strongest peaks remain.Overrides: Threshold: 0.2

Cut Section

Keeps the section between two times.

Parameters (defaults): Start time: 0.2; End time: 1.

Magnify Window

Stretches a single analysis window to a duration.

Parameters (defaults): Time: 0.5; Duration: 3.

Spectrum Fold (channels)

Operates on a range of spectral channels: fold.

Parameters (defaults): Lowest channel: 10; Channels: 64; Folds: 2; Amplitudes only: 0.

Spectrum Invert (channels)

Operates on a range of spectral channels: invert.

Parameters (defaults): Lowest channel: 10; Channels: 64; Amplitudes only: 0.

Spectrum Randomise (channels)

Operates on a range of spectral channels: randomise.

Parameters (defaults): Lowest channel: 10; Channels: 64; Seed: 1; Amplitudes only: 0.

3 presets available
  • Low shuffle: Randomises the lowest channels.Overrides: Lowest channel: 2; Channels: 32; Seed: 3
  • Mid shuffle: Randomises the middle range.Overrides: Lowest channel: 40; Channels: 128; Seed: 7
  • Wide shuffle: Randomises most of the spectrum.Overrides: Lowest channel: 4; Channels: 400; Seed: 21

Back to top

Spectral Formants (17 processes)

Narrow Formants

Steepens the skirts of the formant peaks.

Parameters (defaults): Narrowing: 4; Gain: 1.

3 presets available
  • Focused: Slightly sharper formants.Overrides: Narrowing: 2
  • Sharp: Clearly narrowed formants.Overrides: Narrowing: 10
  • Whistle: Formants reduced to whistling peaks.Overrides: Narrowing: 50

Squeeze Around Formant

Squeezes the spectrum around one formant.

Parameters (defaults): Squeeze: 2; Formant: 1; Around trough: 0; Gain: 1.

Invert Formants

Formant peaks become troughs and troughs peaks.

Parameters (defaults): Alternation rate: 0; Gain: 1.

Rotate Formants

Formants move up (or down) the spectrum and wrap around.

Parameters (defaults): Rotations: 1; Gain: 1.

3 presets available
  • Slow turn: Formants slowly move through the spectrum.Overrides: Rotations: 0.25
  • Wheel: Several rotations per second.Overrides: Rotations: 3
  • Blur: Very fast rotation: formants smear.Overrides: Rotations: 40

Spectral Negative

Inverts the spectral values of each channel.

Parameters (defaults): Flat: 0; Gain: 1.

Move Formants By

Displaces each of the four formants by a frequency.

Parameters (defaults): Formant 1: 200; Formant 2: 0; Formant 3: 0; Formant 4: 0; Gain: 1.

3 presets available
  • Brighter: Formants raised: a smaller, brighter voice.Overrides: Formant 1: 150; Formant 2: 300; Formant 3: 300; Formant 4: 0
  • Darker: Formants lowered: a larger, darker voice.Overrides: Formant 1: -100; Formant 2: -300; Formant 3: -300; Formant 4: 0
  • Shifted F2: Only the second formant moves: a vowel change.Overrides: Formant 1: 0; Formant 2: 600; Formant 3: 0; Formant 4: 0

Move Formants To

Moves each of the four formants to a new frequency.

Parameters (defaults): Formant 1: 300; Formant 2: 900; Formant 3: 2200; Formant 4: 3500; Gain: 1.

Arpeggiate Under Formants

Arpeggiates the spectrum while keeping the formants.

Parameters (defaults): Rate: 4; Up and down: 0; Gain: 0.5.

Octave Shift (keep formants)

Octave-shifts the source while keeping its formants.

Parameters (defaults): Octaves: 1; Fill top: 0; Gain: 0.5.

Transpose (keep formants)

Transposes the source while keeping its formants.

Parameters (defaults): Semitones: 5; Fill top: 0; Gain: 0.5.

3 presets available
  • Fifth up: Up a fifth; the vowel colour stays.Overrides: Semitones: 7
  • Octave down: Down an octave, top filled with extra harmonics.Overrides: Semitones: -12; Fill top: 1
  • Giant: Very low pitch, same formants.Overrides: Semitones: -19; Fill top: 1; Gain: 0.7

Frequency Shift (keep formants)

Frequency-shifts the source while keeping its formants.

Parameters (defaults): Shift: 100; Gain: 0.5.

Respace Partials (keep formants)

Gives the partials a new spacing under the formants.

Parameters (defaults): Spacing: 100; Gain: 1.

3 presets available
  • Dense: Partials packed closely under the formants.Overrides: Spacing: 40
  • Open: Widely spaced partials, same vowel colour.Overrides: Spacing: 250
  • Sparse: Very few partials: a skeletal voice.Overrides: Spacing: 600

Pitch Invert (keep formants)

Inverts the pitch line about a MIDI pitch (0 = mean).

Parameters (defaults): About pitch: 0; Gain: 0.5.

Pitch Range (keep formants)

Contracts the pitch line about a MIDI pitch (0 = mean).

Parameters (defaults): About pitch: 0; Range: 0.5; Gain: 1.

Pitch Randomise (keep formants)

Randomises the pitch line within a range.

Parameters (defaults): Range: 2; Slew: 1; Gain: 1.

3 presets available
  • Unsteady: Slight pitch instability.Overrides: Range: 1
  • Wild: Large random pitch movement.Overrides: Range: 7
  • Rising bias: Random pitch, mostly upward.Overrides: Range: 4; Slew: 3

Randomise Partials (keep formants)

Randomises partial frequencies under the formants.

Parameters (defaults): Randomness: 0.5; Gain: 1.

3 presets available
  • Rough: A slightly rough spectrum.Overrides: Randomness: 0.2
  • Diffuse: Partials clearly scattered.Overrides: Randomness: 0.6
  • Noise-like: Fully randomised partials under the formants.Overrides: Randomness: 1

Sine Speech

Turns the formant frequencies into sine tones.

Parameters (defaults): Sine degree: 1; Gain: 1.

3 presets available
  • Half sine: Halfway between the voice and sine tones.Overrides: Sine degree: 0.5
  • Faint sines: A trace of sine tones under the voice.Overrides: Sine degree: 0.25
  • Bright sines: Sine speech, louder.Overrides: Sine degree: 1; Gain: 2

Back to top